Results 1 to 1 of 1

Thread: Colt Pocket Hammerless disassembly question

  1. #1
    Senior Member  
    Join Date
    Oklahoma City

    Colt Pocket Hammerless disassembly question

    I know on the later models, the barrel bushing is integral to the barrel. On the earlier, how does the bushing come out of the slide? Do you push the recoil spring plug back and then rotate it, similar to a 1911?

    Updated 7/13: found out; push the spring plug in enough to clear, rotate the bushing 180 degrees and it comes out. Which explains where Tokarev stole that design, if there was any real question.
    Last edited by Firehand; July 13th, 2009 at 09:36 PM. Reason: Additional info
    "Let me check my notes."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts