Put magazine in backwards and now I can't remove it. Ant tips?
Put magazine in backwards and now I can't remove it. Ant tips?
http://guntalk-online.com/
Bullseyes site will be able to help. His is the best site for the Ruger Mk pistols.
Joe
I'll just take care of this one right here rather than at Guntalk-Online.
Don't feel bad, you're not the only one to have accomplished this feat over the last year. What you have is a magazine that is caught on the mag safety disconnector hook and the upper window of the magazine body. The harder you pull the worse it gets. What you need is a long thin piece of metal, about eight inches long and a half inch wide, bent into a 90° angle along the length. Slide the metal up on the rear, right side corner of the magazine well, between the frame and the mag body until it stops. Push gently upward, into the mag well, on both the magazine and the metal lever together. Then hold the lever in place and pull downward on just the mag. That should release the hook from inside the mag body and allow it to pull free.
R,
Bullseye
Good suggestion!
Jamie
Greatness lies not in being strong, but in the right use of strength - Henry Ward Beecher
This is why magazine safeties are such a bad idea
When the going gets tough the tough get cyclic!
"The Constitution is a restraining order against the federal government. I'm not going to say a word about the effectiveness of restraining orders against criminals." Standing Wolf
Thanks for the help Bullseye57 . Your fix worked mag poped right out. Thanks again.